Nixie Clock

“All-In-One” Arduino Nixie Clock

Detailed Description

The Arduino “All-In-One” Nixie Clock kit drives 6 IN-14 Nixie Tubes in a traditional “6 in a row” set up. It’s packed full of features, and at the end of the simple build you will have a beautiful IN-14 Nixie Clock. The board is small (150mm x 50mm), and is an easy to build and is a tried and tested design, with many hundreds of units sold.

This kit is based on an Arduino (Atmel ATMega) micro controller. You don’t need to own an Arduino to use this kit! It is self contained and runs without an external Arduino board.

The controller comes pre-programmed. You you can download, modify and upload the open source code if you wish.

This kit is ideal if you want to make an unusual or eye catching clock in a custom case.

Even better: The code is open source, with regular updates and new features.

WiFi Time Provider

If you already have a Clock with the battery-backed RTC (Real Time Clock) module, you can easily upgrade it to use the WiFi time provider module.

This gives you all the advantages of the WiFi kit. You need to have firmware V44 or later to use this.

You set the WiFi provider once once, and it never needs setting again, ever! It also allows you to configure the clock using a browser.

Don Luc