Adafruit – Panel Mount 100K potentiometer (Breadboard Friendly) – 100KB

Adafruit: 1831

Description

This potentiometer is a two-in-one, good in a breadboard or with a panel. Its a fairly standard linear taper 100K ohm potentiometer, with a grippy shaft. Its smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2″ apart with pin-points, so you can plug it into a breadboard or perfboard. Once you’re done prototyping, you can drill a hole into your project box and mount the potentiometer that way.

Technical Details

Dimensions:

• Body: 16mm / 0.6″
• Body Circumference: 50mm / 2″
• Shaft Length: 15mm / 0.6″
• Weight: 6g
• 100K ohm potentiometer, linear taper
• 100,000 Cycle Life
• Rotational Travel: 300 °
• Static Stop Strength: 90 oz-in
• Rotational Torque: 0.5 to 1.25 oz-in

Don Luc