Bluetooth
Project #16: Sound – Bluetooth – Mk21
——
#DonLucElectronics #DonLuc #ESP32 #Bluetooth #ThumbJoystick #Keyboard #Arduino #Project #Fritzing #Programming #Electronics #Microcontrollers #Consultant
——
——
——
——
Bluetooth
Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances and building personal area networks. It employs UHF radio waves in the ISM bands, from 2.402 GHz to 2.48 GHz. It is mainly used as an alternative to wire connections, to exchange files between nearby portable devices, computer and connect cell phones and music players with wireless headphones. In the most widely used mode, transmission power is limited to 2.5 milliwatts, giving it a very short range of up to 10 metres.
DL2210Mk01
1 x Adafruit HUZZAH32 – ESP32 Feather
1 x Lithium Ion Battery – 2500mAh
1 x Thumb Joystick
1 x SparkFun Thumb Joystick Breakout
1 x SparkFun Cerberus USB Cable
ESP32 Feather
JY0 – Analog A0
JY1 – Analog A5
SE0 – Digital 13
VIN – +3.3V
GND – GND
——
DL2210Mk01p.ino
/* ***** Don Luc Electronics © ***** Software Version Information Project #16: Sound - Bluetooth - Mk21 16-21 DL2210Mk01p.ino 1 x Adafruit HUZZAH32 – ESP32 Feather 1 x Lithium Ion Battery - 2500mAh 1 x Thumb Joystick 1 x SparkFun Thumb Joystick Breakout 1 x SparkFun Cerberus USB Cable */ // Include the Library Code // ESP32 BLE Keyboard #include <BleKeyboard.h> // ESP32 BLE Keyboard BleKeyboard bleKeyboard; // Connections to joystick // Vertical const int VERT = A0; // Horizontal const int HORIZ = A5; // Pushbutton const int SEL = 13; // Initialize variables for analog and digital values int vertical; int horizontal; int selec; // Software Version Information String sver = "16-21"; void loop() { // ESP32 BLE Keyboard if(bleKeyboard.isConnected()) { // Thumb Joystick isThumbJoystick(); } // Delay delay( 1000 ); }
getThumbJoystick.ino
// Thumb Joystick void isThumbJoystick() { // Read all values from the joystick // Joystick was sitting around 2047 for the vertical and horizontal values // Will be 0-4095 // Vertical vertical = analogRead(VERT); if (vertical == 4095) { // Volume Up bleKeyboard.write(KEY_MEDIA_VOLUME_UP); } else if (vertical == 0) { // Volume Down bleKeyboard.write(KEY_MEDIA_VOLUME_DOWN); } // Horizontal // Will be 0-4095 horizontal = analogRead(HORIZ); if (horizontal == 4095) { // Previous Track bleKeyboard.write(KEY_MEDIA_PREVIOUS_TRACK); } else if (horizontal == 0) { // Next Track bleKeyboard.write(KEY_MEDIA_NEXT_TRACK); } // Will be HIGH (1) if not pressed, and LOW (0) if pressed selec = digitalRead(SEL); if (selec == 0) { // Play/Pause media key bleKeyboard.write(KEY_MEDIA_PLAY_PAUSE); } }
setup.ino
// Setup void setup() { // Make the SEL line an input pinMode(SEL, INPUT_PULLUP); // ESP32 BLE Keyboard bleKeyboard.begin(); }
——
People can contact us: https://www.donluc.com/?page_id=1927
Technology Experience
- Single-Board Microcontrollers (PIC, Arduino, Raspberry Pi,Espressif, etc…)
- IoT
- Robotics
- Camera and Video Capture Receiver Stationary, Wheel/Tank and Underwater Vehicle
- Unmanned Vehicles Terrestrial and Marine
- Research & Development (R & D)
Instructor and E-Mentor
- IoT
- PIC Microcontrollers
- Arduino
- Raspberry Pi
- Espressif
- Robotics
Follow Us
J. Luc Paquin – Curriculum Vitae – 2022 English & Español
https://www.jlpconsultants.com/luc/
Web: https://www.donluc.com/
Web: https://www.jlpconsultants.com/
Facebook: https://www.facebook.com/neosteam.labs.9/
YouTube: https://www.youtube.com/channel/UC5eRjrGn1CqkkGfZy0jxEdA
Twitter: https://twitter.com/labs_steam
Pinterest: https://www.pinterest.com/NeoSteamLabs/
Instagram: https://www.instagram.com/neosteamlabs/
Don Luc