Sure Electronics

Inspiration
Bluetooth Audio Receiver
Aluminum Enclosure BT4.0

SKU: AA-AS41114

Inspiration Series

When the power is connected, the machine is working and LED lighting in a breathing-effect state. When the Bluetooth connection is successful, the LED is lighting all the time.

Welcome to use this self-made Bluetooth audio receiver starter. This product could work well together with Bluetooth adapter in your Laptop or Desktop computer, or mobile phones with Bluetooth audio stream output support. It supports Bluetooth V4.0 +EDR and A2DP protocol; it has a built in 3.5mm audio jack as well as a pair of RCA jacks for audio output. The distance from this unit and the Bluetooth transmitter could be up to 10meters but please notice that it may vary much based on the environment. Resistance and capacity components of high quality, including X7R ceramic capacitors and lower ESR electrolytic capacitors, are used to gain the perfect timber, finally realize high S/N ratio, low THD+N, wide frequency response range etc. This product has power defense plug protection function. The part of analog and digital audio are supported by two independent power chips, which eradicates interference of radio frequency and digital signals with audio at the extreme. Bluetooth 4.0 wireless audio receiver. Enjoy your music with no limitation between wireless and HiFi.

Features

* Single-end audio signal output
* LED status indicator
* External power and signal output connector
* Power defense plug protection function
* It supports APT-X decoding algorithm, which expand the Bluetooth frequency range from 16-20 KHz
* Short corresponding time

Applications

* Desktop Wireless Music Receiver
* Wireless audio source for amplifiers
* Wireless headphone driver (HP amp needed to use with some headphones)

Specifications

Following table lists all typical data of the Bluetooth Audio Receiver Starter.

Note:

Stresses beyond the listed maximum power supply voltage may cause the permanent damage to components on board.

Don Luc